-
Your shopping cart is empty!
Add:north’s Adura™ X is a carbon fiber reinforced Nylon filament that is extremely tough in several aspects. It’s highly wear, chemical and UV resistant with a working temperature of up to 110°C. Laye..
From 637 SEK Ex Tax: 509 SEK
EasyFlex is a TPU-based material with 95A Shore hardness. It is easy to use, has good chemical resistance, and is very ductile and durable. Print anything from phone cases to gaskets to RC car tires –..
From 387 SEK Ex Tax: 309 SEK
Add:north's PETG prints easily, is odorless, has low warping and a high impact resistance. PETG has grown to be one of the most popular materials for many 3D printer users. It has in many ways replace..
From 283 SEK Ex Tax: 226 SEK
Add:north's PETG prints easily, is odorless, has low warping and a high impact resistance. PETG has grown to be one of the most popular materials for many 3D printer users. It has in many ways replace..
From 283 SEK Ex Tax: 226 SEK
Add:north's PLA Wood is a blend that contains 40% wood fibres and 60% biobased PLA. The finished print smells, feels and looks like wood, and is very easy to post-process with a fine sandpaper for exc..
From 337 SEK Ex Tax: 269 SEK
Add:north’s Rigid X is a carbon fiber reinforced PETG filament. It combines the excellent chemical, heat and UV resistance of regular PETG, along with the strength and stiffness of carbon fibers. It a..
From 487 SEK Ex Tax: 389 SEK
Add:north’s Rigid X is a carbon fiber reinforced PETG filament. It combines the excellent chemical, heat and UV resistance of regular PETG, along with the strength and stiffness of carbon fibers. It a..
From 487 SEK Ex Tax: 389 SEK
For the MakerBot Replicator+ 3D printer, this kit includes the Flex Build Plate for easy print removal. On top is the MakerBot Grip Surface for better adhesion when printing as well as reduced warping..
767 SEK Ex Tax: 614 SEK
Air Manager for the 3D printer Ultimaker S5. Fully encloses the build chamber and filters up to 95% of all ultrafine particles (UFPs). The result? A safer work environment and peace of mind when ..
9,870 SEK Ex Tax: 7,896 SEK
With Material Station for the Ultimaker S5 3D printer you reach a new level of productivity and consistency by adding capacity for six front-loaded material spools, automatic switching between materia..
36,175 SEK Ex Tax: 28,940 SEK
Ultimaker PETG sets the standard for enterprise-grade industrial use. Available in a variety of colors – including transparent and fluorescent – it is perfectly suited for a wide range of use cases, t..
From 500 SEK Ex Tax: 400 SEK
Ultimaker PLA (polylactic acid) filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Our PLA is made from organic and renewable sources. It’s safe, ..
From 435 SEK Ex Tax: 348 SEK
Ultimaker Tough PLA is a technical PLA (polylactic acid) material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Ultimaker's Tough PLA of..
From 525 SEK Ex Tax: 420 SEK
Used by an array of industries worldwide, ABS (acrylonitrile butadiene styrene) is known for its exceptional mechanical properties. Specifically formulated to minimize warping and ensure consistent in..
From 500 SEK Ex Tax: 400 SEK
The print volume of the Builder Premium Medium Dual-Feed is rare when comparing it to other 3D printers. With a maximum build volume of 210 x 210 x 400 mm it is the perfect 3D printer for large object..
41,245 SEK Ex Tax: 32,996 SEK
Polyvinyl alcohol (PVOH, PVA, or PVAl) is a water-soluble synthetic polymer, not to be confused with polyvinyl acetate also referred to as PVA. It is used in papermaking, textiles, and a variety ..
From 525 SEK Ex Tax: 420 SEK
White PTFE bowden tube (filament tube) which fits all 3D printers with bowden extruders (using 1.75 mm filaments). This bowden tube can withstand up to 260 degrees, and has an outer diameter of 4 mm a..
From 80 SEK Ex Tax: 64 SEK
Note! Warranty is voided if other filament than MakerBot Tough PLA is used with the MakerBot Tough Smart Exruder+.MakerBot Tough Smart Extruder+ comes in two versions, compatible with MakerBot Re..
From 2,968 SEK Ex Tax: 2,374 SEK
Ultimaker PP (polypropylene) is durable. It has high toughness, exceptional fatigue resistance, and low friction. It also has good chemical, temperature, and electrical resistance. PP is one of the mo..
520 SEK Ex Tax: 416 SEK
Isopropanol (IPA 99.9 %) for cleaning off e.g. excess resins on SLA 3D printers like the Formlabs Form 3 or other similar SLA printers, and for cleaning FFF 3D printer build plates. See MSDS here..
224 SEK Ex Tax: 179 SEK
Ultimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a quality finish on your 3D print. Designe..
715 SEK Ex Tax: 572 SEK
Please note that the warranty is voided if other filament than MakerBot PLA is used with the MakerBot Smart Extruder+. MakerBot Smart Extruder+ is available in two versions: one is compatible wi..
From 2,671 SEK Ex Tax: 2,137 SEK
Create durable, high-impact strength prototypes and fixtures with MakerBot Tough PLA filament. Engineers and designers can save time and money with a filament that is as tough as ABS and as reliable t..
From 912 SEK Ex Tax: 729 SEK
Large spool with 4.5 kg high quality Ø1.75mm PLA filament manufactured by Dutch producers Innofil3D. For Builder Extreme 3D printer series...
From 2,500 SEK Ex Tax: 2,000 SEK
A 3-pack MakerBot Grip Surface sheets for the MakerBot Replicator+ 3D printer. The Grip Surface gives better adhesion when printing and reduces warping and/or curling...
512 SEK Ex Tax: 409 SEK
Large spool with 4.5 kg high quality Ø1.75mm PLA filament manufactured by Builder. For the Builder Extreme 3D printer series...
From 1,875 SEK Ex Tax: 1,500 SEK
Original build surface stickers for Flashforge 3D printers. Provide excellent bond for 3D prints, and also easy removal of finished prints.Easy to applyRemove any residual glue and/or old build s..
From 99 SEK Ex Tax: 79 SEK
-50%
ABS filament for 3D printing with the diameter 1.75 mm. ..
From 145 SEK Ex Tax: 116 SEK
-50%
ECOrefill Wood 1.5 kg Ø2.85 mm PLA filament with wood fibres which give the 3D prints a sensation real wood...
495 SEK 248 SEK Ex Tax: 198 SEK
-50%
ECOrefill Wood 800 grams Ø2.85 mm PLA filament with wood fibres which give the 3D prints a sensation real wood...
275 SEK 138 SEK Ex Tax: 110 SEK
3D 4 SCHOOLS
Creative Tools' initiative to help teachers to adopt to the new and revolutionary 3D techonology and to encourage the use of 3D in school.
#3DBENCHY
A 3D model by Creative Tools specifically designed for testing and benchmarking 3D printers. Download for free, make and share.
3DEXPO
Creative Tools' event where 3D professionals meet to network, gain insights from expert speakers, and pick up on the latest 3D news.
