Taulman 3D - BluPrint - 1.75 mm
BluPrint is a “specialty” material and has a glass transition of more than 110 °C but with a print temp of only 265 °C. Prints on warm (45 °C) BuildTak and on clean glass heated to circa 92 °C. Also prints on heated PIE sheets set to 55 °C.
BluPrint is a semi-clear material of circa 84% transmission. Like all taulman3D materials, BluPrint is a 100 % bonding layer to layer polymer when printed at defined temperatures. A significant advantage of BluPrint is that when paired with the new E3D Volcano hotend, users and industry can print at speeds of 44 mm/s with a 1 mm nozzle and 0.46 mm layer. As layer and nozzle size go down, speeds increase as expected to 120 mm/s with a 0.4 mm nozzle.
BluPrint will allow designers to 3D Print parts that will take high heat for outdoor use such as part replacements for autos, boats and aircrafts.
More on using Taulman 3D BluPrint
In this article from Creative Tools Helpdesk are valuable tips when using Taulman 3D BluPrint (in Swedish).
|Filament Diameter||1.75 mm|
|Filament Weight||0.45 kg|