-
Your shopping cart is empty!
ZYYX proNylon™ is a nylon based filament for 3D printing and rapid nylon prototyping. Using the ZYYX proNylon, flexible parts with low friction and high toughness can be created. It is also resistant ..
1,188 SEK Ex Tax: 950 SEK
The ZYYX proCarbon™ is a nylon based filament reinforced with carbon fibers. It is developed to allow professionals to rapidly produce customized, high strength parts on their desks. Using the ZYYX pr..
1,188 SEK Ex Tax: 950 SEK
ECO HIPS is a dissolvable material and is therefore great to use as a support material when 3D printing. HIPS dissolves easily in Limonene.All material types in the ECO filament range are produced in ..
From 399 SEK Ex Tax: 319 SEK
Polycarbonates (PC), known by the trademarked names Lexan, Makrolon and others, are a particular group of thermoplastic polymers. They are easily worked, molded, and thermoformed. Because of these pro..
545 SEK Ex Tax: 436 SEK
ECO PC/ABS is a special material for 3D printing, a blend of PC and ABS plastic.All material types in the ECO filament range are produced in a sustainable way, in line with Creative Tools values. The ..
From 395 SEK Ex Tax: 316 SEK
All material types in the ECO filament range are produced in a sustainable way, in line with Creative Tools values. The ECO filaments are made of high-quality granules. The manufacturing process is we..
From 395 SEK Ex Tax: 316 SEK
Large spool with 4.5 kg high quality Ø1.75mm PET filament manufactured by Dutch producers Innofil3D. For the Builder Extreme 3D printer series.PET characteristicsEasier to print with than ABSHigher gl..
1,875 SEK Ex Tax: 1,500 SEK
ASA (Acrylonitrile-Styrene-Acrylate) have similar mechanical properties to ABS, with the benefit that it is more weather-resistant. ASA filament is great for building/construction, automotiv..
From 400 SEK Ex Tax: 320 SEK
CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts.About NFC tagThe Ult..
From 520 SEK Ex Tax: 416 SEK
Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. With its abilit..
From 680 SEK Ex Tax: 544 SEK
ColorFabbs BamboFill består av 80% colorFabb PLA och 20% återanvänd bamboofiber. Standardinställningar (viss justering kan krävas för din maskin): 195-220C* nozzle temperatur ..
459 SEK Ex Tax: 367 SEK
ColorFabbs BronzeFill består av 20% colorFabb PLA-PHA och 80% fint bronspulver. Standardinställningar (viss justering kan krävas för din maskin): 195-220C* nozzle temperatur 40 - ..
511 SEK Ex Tax: 409 SEK
ColorFabbs BronzeFill består av colorFabb PLA-PHa och merparten fint bronspulver. Standardinställningar (viss justering kan krävas för din maskin): 195-220C* nozzle temperatur 40 ..
511 SEK Ex Tax: 409 SEK
ColorFabbs CopperFill består av colorFabb PLA-PHA och merparten fint kopparpulver. OBS - Experimentellt material Rekommenderade grundinställningar (Justering krävas för just din maskin!): ..
511 SEK Ex Tax: 409 SEK
ColorFabbs CopperFill består av colorFabb PLA-PHA och merparten fint kopparpulver. OBS - Experimentellt material Rekommenderade grundinställningar (Justering krävas för just din maskin!): ..
511 SEK Ex Tax: 409 SEK
ColorFabbs WoodFill består av 70% colorFabb PLA och 30% återanvänd bamboofiber. Standardinställningar (viss justering kan krävas för din maskin): 195-220C* nozzle temperatur ..
459 SEK Ex Tax: 367 SEK
ColorFabbs WoodFill består av 70% colorFabb PLA och 30% återanvänd bamboofiber. Standardinställningar (viss justering kan krävas för din maskin): 195-220C* nozzle temperatur ..
459 SEK Ex Tax: 367 SEK
-30%
You get: a trial amount of 0.25 Kg in 1.75 mm diameteter as a coil out of LayBrick filamentbeta.. LayBrick is printable from smooth to very rough surface, near sandstone LayBrick feels like..
300 SEK 210 SEK Ex Tax: 168 SEK
PP (Polypropylene) filament by Acccreate (1.75 mm in diameter). The size of the spool is customized to fit the 3D printers FlashForge Finder and FlashForge Inventor II's built-in spool holders, but ca..
225 SEK Ex Tax: 180 SEK
Nylon 230 is the first nylon ever developed to be printed at 230 °C or a lower temperature than any other 3D Printing Nylon. With the release of Nylon 230, taulman3D will provide owners of PLA only..
286 SEK Ex Tax: 229 SEK
ECO BioSilk is a polymer hybrid filament made by a set of bio-polymer materials to give a silky pearl appearance. An ideal strong and flexible 3D printing material for jewelry models, clothing mo..
325 SEK Ex Tax: 260 SEK
PolySmooth is a filament designed specifically for those who want to post-process their 3D printed parts. 3D print using PolySmooth, and polish the 3D printed object in the Polysher unit to achieve an..
From 495 SEK Ex Tax: 396 SEK
Taulman 3D's T-Glase filament for 3D printing in the diameter 1.75 mm...
436 SEK Ex Tax: 349 SEK
3D 4 SCHOOLS
Creative Tools' initiative to help teachers to adopt to the new and revolutionary 3D techonology and to encourage the use of 3D in school.
#3DBENCHY
A 3D model by Creative Tools specifically designed for testing and benchmarking 3D printers. Download for free, make and share.
3DEXPO
Creative Tools' event where 3D professionals meet to network, gain insights from expert speakers, and pick up on the latest 3D news.
